ECMA2D DIELINE3D FOLDED
Retail Product Box — Open Top, Auto-Lock Base
ECMA A60.01.01.00 · 4 configurable parameters
Create dielineBOX STYLE · LOCK BOTTOM
Auto-lock and snap-lock bottom cartons.
These folding cartons close the base with interlocking flaps instead of a tuck flap, so they carry heavier products and stand square on the shelf. The two groups below differ in where the bottom is formed: glued at the converter, or folded by hand at packing.
Auto-lock (crash-lock) bottom · ECMA A60 · A61
32 templates
The bottom flaps are glued on the folder-gluer, so the carton is delivered flat and the base drops into place as soon as the carton is opened. It suits fast packing by hand or by machine. The top closure varies: tuck flap, full overlap, hang tab, claw lock and more.
ECMA2D DIELINE3D FOLDED
Retail Product Box — Full Overlap Top, Auto-Lock Base
ECMA A60.10.01.03 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box
ECMA A60.10.01.03.32 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Hang-Tab Full Overlap Top, Auto-Lock Base
ECMA A60.15.01.03 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Cosmetic Box — Auto-Bottom, Tuck Top
ECMA A60.20.01.01 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Tuck Top, Auto-Lock Base
ECMA A60.20.01.03 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Tab-Locking Tuck Top, Auto-Lock Base
ECMA A60.20.01.03.31 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Hang-Tab Tuck Top, Auto-Lock Base
ECMA A60.21.01.03 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Hook-Lock Tuck Top, Auto-Lock Base
ECMA A60.30.01.01 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Hook-Lock Tuck Top, Auto-Lock Base (Model 2)
ECMA A60.30.01.03 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Side Tuck Top, Auto-Lock Base
ECMA A60.40.01.03 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Winged Side-Tuck Top, Auto-Lock Base
ECMA A60.41.01.03 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Joined Dust Flap Top, Auto-Lock Base
ECMA A60.45.01.01 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Claw Lock Top, Auto-Lock Base
ECMA A60.50.01.00 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Claw Lock Top, Auto-Lock Base (Model 2)
ECMA A60.50.01.03 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Sealed Top, Auto-Lock Base
ECMA A60.70.01.00 · 5 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Hollow Dust Flap Tuck Top, Auto-Lock Base
ECMA A60.80.01.03 · 5 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Hollow Dust Flap Top, Auto-Lock Base
ECMA A60.81.01.00 · 5 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Webbed Dust Flap Tuck Top, Auto-Lock Base
ECMA A60.99.01.03 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Open Top, Auto-Bottom Base
ECMA A61.01.01.00 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Full Overlap Top, Auto-Bottom Base
ECMA A61.10.01.03 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box
ECMA A61.10.01.03.32 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Hang-Tab Full Overlap Top, Auto-Bottom Base
ECMA A61.15.01.03 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Tuck Top, Auto-Bottom Base
ECMA A61.20.01.01 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Tuck Top, Auto-Bottom Base (Model 2)
ECMA A61.20.01.03 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Tab-Locking Tuck Top, Auto-Bottom Base (Model 2)
ECMA A61.20.01.03.31 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Hang-Tab Tuck Top, Auto-Bottom Base
ECMA A61.21.01.03 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Side Tuck Top, Auto-Bottom Base
ECMA A61.40.01.03 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Joined Dust Flap Top, Auto-Bottom Base
ECMA A61.45.01.01 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Claw Lock Top, Auto-Bottom Base
ECMA A61.50.01.00 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Sealed Top, Auto-Bottom Base
ECMA A61.70.01.00 · 5 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Webbed Dust Flap Tuck Top, Auto-Bottom Base (Model 2)
ECMA A61.99.01.03 · 4 configurable parameters
Create dielineSnap-lock (1-2-3) bottom · ECMA A55
25 templates
Four bottom flaps are folded in by hand, one after another, and lock against each other with no glue on the base. It needs no extra gluing step in production and suits shorter runs; it takes a few seconds longer to erect than an auto-lock bottom.
ECMA2D DIELINE3D FOLDED
Handled Carry Box — Snap-Lock Base, Carry Handle
ECMA A55.00.01.01 84 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Handled Carry Box — Snap-Lock Base, Gable Handle
ECMA A55.00.01.01 85 · 5 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Bakery & Cake Box — Open Top, Snap-Lock Base
ECMA A55.01.01.00 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Bakery & Cake Box — Full Overlap Top, Snap-Lock Base
ECMA A55.10.01.03 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Tab-Locking Full Overlap Top, Snap-Lock Base
ECMA A55.10.01.03.32 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Hang-Tab Full Overlap Top, Snap-Lock Base
ECMA A55.15.01.03 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Tuck Top, Snap-Lock Base
ECMA A55.20.01.01 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Tuck Top, Snap-Lock Base (Model 2)
ECMA A55.20.01.03 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Tab-Locking Tuck Top, Snap-Lock Base (Model 2)
ECMA A55.20.01.03.31 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Hanging Retail Box — Hang Tab, Snap-Lock Base
ECMA A55.21.01.01 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Hanging Retail Box — Hang Tab, Snap-Lock Base
ECMA A55.21.01.03 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Hook-Lock Tuck Top, Snap-Lock Base
ECMA A55.30.01.01 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Hook-Lock Tuck Top, Snap-Lock Base
ECMA A55.30.01.03 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Side Tuck Top, Snap-Lock Base
ECMA A55.40.01.03 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Winged Side-Tuck Top, Snap-Lock Base
ECMA A55.41.01.03 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Joined Dust Flap Top, Snap-Lock Base
ECMA A55.45.01.01 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Claw Lock Top, Snap-Lock Base
ECMA A55.50.01.00 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Claw Lock Top, Snap-Lock Base (Model 2)
ECMA A55.50.01.03 · 4 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Sealed Top, Snap-Lock Base
ECMA A55.70.01.00 · 5 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Gable Top (Model 2)
ECMA A55.75.01.03 · 5 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Hollow Dust Flap Tuck Top, Snap-Lock Base
ECMA A55.80.01.03 · 5 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Hollow Dust Flap Top, Snap-Lock Base
ECMA A55.81.01.00 · 5 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Webbed Rosette Top, Snap-Lock Base
ECMA A55.82.01.00 · 3 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Rosette Top, Snap-Lock Base
ECMA A55.83.01.00 · 3 configurable parameters
Create dieline
ECMA2D DIELINE3D FOLDED
Retail Product Box — Webbed Dust Flap Tuck Top, Snap-Lock Base
ECMA A55.99.01.03 · 4 configurable parameters
Create dielineBefore you cut a run
Folding cartons are cut from carton board, and the board thickness you enter changes the dieline. Settle the board grade with your printer first.
Agree with your converter whether the sizes are inside or outside dimensions before you send the file.
Cut and fold one sample before you order a cutting die.