Handled Carry Box

Reading the code A60.00.01.01.85

A60.00.01.01.85 sits in ECMA group A: long-seam-glued folding cartons with rectangular surfaces. The carton is glued into a sleeve along its long seam, and the code's panels are numbered 1 to 4 starting from that glue seam. The two leading blocks describe the closure systems — the bottom first (60), then the top (00); the following blocks record which panel each closure's flap is connected to.

Here the bottom end uses the automatic (pre-glued) closure system (60), and the top end uses the carry-handle top in place of a flap closure (00).

Counting from the glue seam, the bottom flap hangs on panel 1 and the top flap hangs on panel 1.

The trailing .85 is an ECMA group X feature code: this design adds a carrying handle formed as a gable top of two tuck-ins.

How the closures behave

The base is glued during carton manufacture and folds flat; when the packer squares the sleeve, the base springs into place already closed — the crash-lock principle that makes this the fastest base to erect on a filling line.

The top of the carton is not closed by flaps at all: the panels rise into a carry handle (the trailing .84 or .85 code) and the product is held by the handle's own fold, so the carton is carried shut rather than closed shut.

Typical uses

Pre-glued automatic bases are the high-throughput answer: the carton erects in one movement, which pays off on fast filling lines and for products packed in volume.

Dimensions and board

The parameters above — length, width, depth and paper thickness — drive the whole blank. Board caliper is not a footnote: tuck clearances, lock engagement and panel fit all scale with it, which is why it is a first-class input to the parametric model rather than an allowance you add by hand.

Every value is validated against the template's supported range, and the 2D dieline and 3D fold preview regenerate together from the same structure. Confirm final board grade, grain direction and tolerances with your converter before production.

What is Handled Carry Box — Auto-Lock Base, Gable Handle?

ECMA A60.00.01.01.85 is a long-seam-glued folding carton in ECMA group A (base: automatic (pre-glued) closure system; top: carry-handle top in place of a flap closure).

Which dimensions does the Handled Carry Box — Auto-Lock Base, Gable Handle dieline need?

5 parameters drive the blank: L (length), W (width), D (depth), H (height), Paper thickness (mm, µm). Each value is validated against the template's supported range, and the whole dieline regenerates from them.

Can I see how Handled Carry Box — Auto-Lock Base, Gable Handle folds before cutting it?

Yes. The interactive 3D fold preview and the 2D dieline are generated from the same parametric model, so the fold you watch on screen is the geometry of the sheet you cut. Open the template in the studio to fold it at your own dimensions; 3D folding comes with the Workshop and Line plans.