Retail Product Box

Reading the code A10.75.03.03

A10.75.03.03 sits in ECMA group A: long-seam-glued folding cartons with rectangular surfaces. The carton is glued into a sleeve along its long seam, and the code's panels are numbered 1 to 4 starting from that glue seam. The two leading blocks describe the closure systems — the bottom first (10), then the top (75); the following blocks record which panel each closure's flap is connected to.

Here the bottom end uses the full overlapping closure system (10), and the top end uses the gable top (75).

Counting from the glue seam, the bottom flap hangs on panel 3 and the top flap hangs on panel 3.

This template is catalogue variant A of the coded construction, with adjusted proportions.

How the closures behave

The closing flaps overlap across the full face of the end, producing a double layer of board. That doubled face carries load well, which is why full-overlap ends are chosen where the base takes weight or repeated handling.

The top panels meet in a ridge like a roof and lock through each other to form a built-in carry handle, so the carton closes and carries without tape or a separate lid.

Typical uses

Full-overlap ends are chosen where the base carries real load: denser products, stacked storage, or cartons that are lifted from the base in handling.

Gable-top cartons are carried away by their own handle: bakery and patisserie boxes, takeaway meals, party favours and gift packs sold at the counter.

Dimensions and board

The parameters above — length, width, depth and paper thickness — drive the whole blank. Board caliper is not a footnote: tuck clearances, lock engagement and panel fit all scale with it, which is why it is a first-class input to the parametric model rather than an allowance you add by hand.

Every value is validated against the template's supported range, and the 2D dieline and 3D fold preview regenerate together from the same structure. Confirm final board grade, grain direction and tolerances with your converter before production.

Industries and applications

Converters cut the Retail Product Box (ECMA A10.75.03.03.A) for retail product boxes for the shelf, food and dry-goods cartons, and pharmacy cartons for medicines, blister packs and supplements.

Retail cartons live on a shelf: they must stand square, print well on every face and close again after a customer has looked inside.

What is Retail Product Box — Gable Top (Variant A)?

ECMA A10.75.03.03 is a long-seam-glued folding carton in ECMA group A (base: full overlapping closure system; top: gable top). This template is catalogue variant A of the construction.

Which dimensions does the Retail Product Box — Gable Top (Variant A) dieline need?

5 parameters drive the blank: L (length), W (width), D (depth), H (height), Paper thickness (mm, µm). Each value is validated against the template's supported range, and the whole dieline regenerates from them.

Can I see how Retail Product Box — Gable Top (Variant A) folds before cutting it?

Yes. The interactive 3D fold preview and the 2D dieline are generated from the same parametric model, so the fold you watch on screen is the geometry of the sheet you cut. Open the template in the studio to fold it at your own dimensions; 3D folding comes with the Workshop and Line plans.