ECMA · 2D DIELINE
Gift Box
ECMA B40.23.00.54
Tray with Glued Front Corners, Webbed Back Corners and Hinged Lid. A tray cut without a longitudinal glue seam: the two front corners close with corner flaps glued inside the end walls, and at the two back corners each end wall continues into a folded web that stands against the back wall. It closes with a three-side-flap lid hinged on the back wall.
Use this templateInteractive 3D folding is available in the studio.
Artwork shown for illustration. Add your own in the studio.
CONSTRUCTION NOTES
About this construction.
Reading the code B40.23.00.54
B40.23.00.54 sits in ECMA group B: non-long-seam-glued folding cartons with rectangular surfaces — tray-style constructions that lock together without a glued long seam, with all outer panels meeting at right angles. The code's blocks describe, in order, the basic tray shape (40), the flap locking system (23), the dust flaps (00) and the cover system (54).
This design is a single-wall tray glued at its four corners, with flap locking system 23, closed by a three-winged webbed cover.
Group B designs can serve as a single tray or, paired with a matching lid, as a telescopic packaging system.
Typical uses
Unglued tray constructions are erected at the point of use without adhesive: food and bakery trays, counter and display trays, and — with a lid — telescoping gift and presentation boxes. Because they lock by geometry, they store and ship flat and assemble by hand in seconds.
Dimensions and board
The parameters above — length, width, depth and paper thickness — drive the whole blank. Board caliper is not a footnote: tuck clearances, lock engagement and panel fit all scale with it, which is why it is a first-class input to the parametric model rather than an allowance you add by hand.
Every value is validated against the template's supported range, and the 2D dieline and 3D fold preview regenerate together from the same structure. Confirm final board grade, grain direction and tolerances with your converter before production.
COMMON QUESTIONS
Quick answers about this template.
What is Gift Box — Glued Front Corners, Webbed Back Corners, with Hinged Lid?
ECMA B40.23.00.54 is an unglued tray-style folding carton in ECMA group B: a single-wall tray glued at its four corners, closed by a three-winged webbed cover.
Which dimensions does the Gift Box — Glued Front Corners, Webbed Back Corners, with Hinged Lid dieline need?
4 parameters drive the blank: L (length), W (width), D (depth), Paper thickness (mm, µm). Each value is validated against the template's supported range, and the whole dieline regenerates from them.
Can I see how Gift Box — Glued Front Corners, Webbed Back Corners, with Hinged Lid folds before cutting it?
Yes. The interactive 3D fold preview and the 2D dieline are generated from the same parametric model, so the fold you watch on screen is the geometry of the sheet you cut. Open the template in the studio to fold it at your own dimensions; 3D folding comes with the Workshop and Line plans.