Gift Box

Reading the code B40.22.00.61

B40.22.00.61 sits in ECMA group B: non-long-seam-glued folding cartons with rectangular surfaces — tray-style constructions that lock together without a glued long seam, with all outer panels meeting at right angles. The code's blocks describe, in order, the basic tray shape (40), the flap locking system (22), the dust flaps (00) and the cover system (61).

This design is a single-wall tray glued at its four corners, locked with in-fold corner flaps glued inside the end walls, closed by a hinged lid with three side flaps glued at the corners.

Group B designs can serve as a single tray or, paired with a matching lid, as a telescopic packaging system.

How the closures behave

There is no long glue seam; instead the corner flaps fold inward and are glued inside the end walls at the converter, so the tray arrives ready-glued and pops square. The lid is hinged from the back wall and carries three side flaps, glued at its two corners, so it closes as a shallow second tray over the base.

Typical uses

Unglued tray constructions are erected at the point of use without adhesive: food and bakery trays, counter and display trays, and — with a lid — telescoping gift and presentation boxes. Because they lock by geometry, they store and ship flat and assemble by hand in seconds.

Dimensions and board

The parameters above — length, width, depth and paper thickness — drive the whole blank. Board caliper is not a footnote: tuck clearances, lock engagement and panel fit all scale with it, which is why it is a first-class input to the parametric model rather than an allowance you add by hand.

Every value is validated against the template's supported range, and the 2D dieline and 3D fold preview regenerate together from the same structure. Confirm final board grade, grain direction and tolerances with your converter before production.

Industries and applications

Converters cut the Gift Box (ECMA B40.22.00.61) for gift boxes and presentation packs and chocolate, praline and confectionery boxes.

Gift packaging sells on the moment of opening, so the closure and the fit of the lid matter as much as the print.

What is Gift Box — Four-Corner Glued Tray, In-Fold, with Hinged Lid?

ECMA B40.22.00.61 is a four-corner glued tray with a glued-corner lid: a single-wall tray glued at its four corners, with an in-fold corner flap inside each end wall, closed by a hinged lid whose three side flaps are glued at the corners.

Which dimensions does the Gift Box — Four-Corner Glued Tray, In-Fold, with Hinged Lid dieline need?

4 parameters drive the blank: L (length), W (width), D (depth), Paper thickness (mm, µm). Each value is validated against the template's supported range, and the whole dieline regenerates from them.

Can I see how Gift Box — Four-Corner Glued Tray, In-Fold, with Hinged Lid folds before cutting it?

Yes. The interactive 3D fold preview and the 2D dieline are generated from the same parametric model, so the fold you watch on screen is the geometry of the sheet you cut. Open the template in the studio to fold it at your own dimensions; 3D folding comes with the Workshop and Line plans.