Rigid Box · 2D DIELINE
Wrapped Drawer Rigid Box
PD-DR04
The drawer construction delivered as a wrapped kit: tray board with its wrapper and sleeve board with its wrapper, four blanks generated from one parameter set.
Create this dielineInteractive 3D folding is available in the preview studio.
SUPPORTED INPUTS
Dimensions and parameters.
These values come directly from the template blueprint. No extra specifications have been invented.
STRUCTURE NOTES
About this construction.
How the construction works
The SC series is the drawer construction: an inner tray slides into an outer sleeve, the way a matchbox works. Tray and sleeve are separate wrapped components, and their fit is the whole game — the sleeve's inner clearance must accept the tray plus its wrap, with board thickness consuming real millimeters on every wall.
Inside this construction
Configuring this template produces the construction's full component kit — four component sheets — as separate blanks generated from the same parameters, so the parts agree with each other by construction.
Board, wrap and fit
In rigid work the board's thickness is a first-class dimension, which is why it appears among this template's parameters: every internal measurement propagates outward through the caliper, a lid must clear what it closes over, and a tray must seat inside walls whose thickness consumes real millimeters. The wrapper blanks carry turn-in allowances derived from the same dimensions as the boards they cover.
Change one dimension and the dependent component blanks update in step, keeping the fit relationships intact. Confirm board caliper, wrap material and corner treatment with your manufacturer before committing tooling — corner style in particular can rule construction options in or out.
Typical uses
Drawer boxes serve jewelry, accessories, confectionery and premium small goods: the slide-open motion presents the product, and the sleeve face carries uninterrupted artwork.
COMMON QUESTIONS
Quick answers about this template.
What is Wrapped Drawer Rigid Box?
Rigid SC04 is a drawer-style rigid box — a wrapped tray sliding into an outer sleeve the way a matchbox works; configuring it generates every component blank — boards and wrappers — from the same parameters.
Which dimensions does the Wrapped Drawer Rigid Box dieline need?
5 parameters drive the blank: L (length), W (width), D (depth), Rigid board thickness, Wrapper thickness (mm, um). Each value is validated against the template's supported range, and the whole dieline regenerates from them.
Can I see how Wrapped Drawer Rigid Box folds before cutting it?
Yes. The interactive 3D fold preview and the 2D dieline are generated from the same parametric structure, so the fold you watch on screen is the geometry of the sheet you cut. Open the template in the preview studio to fold it at your own dimensions.