ECMA · 2D DIELINE
Gable-Handle Snap-Lock Carry Carton
ECMA A55.00.01.01 85
The snap-lock carry carton with its handle formed at a gabled top — the top folds up into the grip rather than carrying a separate handle.
Create this dielineInteractive 3D folding is available in the preview studio.
SUPPORTED INPUTS
Dimensions and parameters.
These values come directly from the template blueprint. No extra specifications have been invented.
STRUCTURE NOTES
About this construction.
Reading the code A55.00.01.01.85
A55.00.01.01.85 sits in ECMA group A: long-seam-glued folding cartons with rectangular surfaces. The carton is glued into a sleeve along its long seam, and the code's panels are numbered 1 to 4 starting from that glue seam. The two leading blocks describe the closure systems — the bottom first (55), then the top (00); the following blocks record which panel each closure's flap is connected to.
Here the bottom end uses the self-locking envelope closure system (55), and the top closure is recorded as 00.
Counting from the glue seam, the bottom flap hangs on panel 1 and the top flap hangs on panel 1.
The trailing .85 is an ECMA group X feature code: this design adds a carrying handle formed as a gable top of two tuck-ins.
How the closures behave
The closing panels fold in sequence and lock into each other without glue. The result holds itself shut through geometry alone — useful where adhesive at the point of packing is unwanted.
Typical uses
Self-locking envelope bases hold weight without glue at the packing point, a common choice for medium-weight retail goods packed by hand.
Dimensions and board
The parameters above — length, width, depth and paper thickness — drive the whole blank. Board caliper is not a footnote: tuck clearances, lock engagement and panel fit all scale with it, which is why it is a first-class input to the parametric model rather than an allowance you add by hand.
Every value is validated against the template's supported range, and the 2D dieline and 3D fold preview regenerate together from the same structure. Confirm final board grade, grain direction and tolerances with your converter before production.
COMMON QUESTIONS
Quick answers about this template.
What is Gable-Handle Snap-Lock Carry Carton?
ECMA A55.00.01.01.85 is a long-seam-glued folding carton in ECMA group A (base: self-locking envelope closure system; top: closure system 00).
Which dimensions does the Gable-Handle Snap-Lock Carry Carton dieline need?
5 parameters drive the blank: L (length), W (width), D (depth), H (height), Paper thickness (mm, um). Each value is validated against the template's supported range, and the whole dieline regenerates from them.
Can I see how Gable-Handle Snap-Lock Carry Carton folds before cutting it?
Yes. The interactive 3D fold preview and the 2D dieline are generated from the same parametric structure, so the fold you watch on screen is the geometry of the sheet you cut. Open the template in the preview studio to fold it at your own dimensions.